HPR130XD | HPR260XD
HPR130XD
The HyPerformance® HPR130XD plasma system has been designed and built for maximum performance and productivity in x-y, bevel and robotic cutting operations. The versatile 130-amp rated system combines fast cutting speeds, rapid process cycling, quick changeovers and high reliability, and gives you unmatched HyPerformance cut quality from very thin up to mid-range materials.
Benefits
Superior cut quality and consistency
- HyPerformance plasma cuts fine-feature parts with superior quality and consistency
- HyDefinition® technology aligns and focuses the plasma arc for more powerful precision cutting up to 38 mm (1-1/2").
- New HDi™ technology delivers HyDefinition cut quality on thin stainless, with extremely sharp top edge quality, shiny surface finish, and superior angularity with reduced angle variation
- Patented True Hole™ technology (auto gas systems only) produces hole quality that is significantly better than anything previously achievable with plasma
Minimized operating cost
- LongLife® technology significantly increases consumable life and enables consistent HyDefinition cut quality
- Faster cut speeds let you produce more parts per hour; higher quality cutting virtually eliminates the cost of secondary operations
- Patented PowerPierce® technology lets you pierce thicker than ever before and replace slower-cutting oxyfuel technology
“Do anything” versatility
- Cuts, bevels, and marks carbon steel, stainless steel, aluminum, and other metals with HyDefinition precision
- Modular system design allows easy power supply upgrades to increase system capabilities when requirements change
Industry-leading reliability
- Robust, simple system architecture with 50% fewer parts than most competitive systems
- Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards
Specifications
| Mild steel cut capacity | Dross free Production pierce Maximum cutting capacity |
16 mm (5/8") 32 mm (1-1/4") 38 mm (1-1/2") |
|---|---|---|
| Stainless steel cut capacity | Production pierce Maximum cutting capacity |
20 mm (3/4") 25 mm(1") |
| Aluminum cut capacity | Production pierce Maximum cutting capacity |
20 mm (3/4") 25 mm (1") |
| Speed (Mild steel) |
Book specification at highest output current | 12 mm (1/2") 2200 mm/m (80 ipm) |
| Cut angle | ISO 9013 range* | 2-4 |
| Weldability | Ready to weld | |
| Process gases by material (Plasma/shield) |
Mild steel Stainless steel Aluminum |
02/Air, 02/02, Ar/Air H35/N2, N2/N2, H35-N2/N2, F5/N2, Ar/Air, Ar/N2 H35/N2, Air/Air, H35-N2/N2, Ar/Air, Ar/N2 |
| Process amps | Not all processes available for all materials |
30-130 |
HPR260XD
The HyPerformance® HPR260XD plasma system has been designed and built for maximum performance and productivity in x-y, bevel and robotic cutting operations. The versatile 260-amp rated system combines fast cutting speeds, rapid process cycling, quick changeovers and high reliability, and gives you unmatched HyPerformance cut quality from very thin up to heavier thicknesses.
Benefits
Superior cut quality and consistency
- HyPerformance plasma cuts fine-feature parts with superior quality and consistency
- HyDefinition® technology aligns and focuses the plasma arc for more powerful precision cutting up to 64 mm (2 1/2").
- New HDi™ technology delivers HyDefinition cut quality on thin stainless steel, with extremely sharp top edge quality, shiny surface finish, and superior angularity with reduced angle variation
- PatentedTrue Hole™ technology (auto gas systems only) produces hole quality that is significantly better than anything previously achievable with plasma
Minimized operating cost
- LongLife® technology significantly increases consumable life and enables consistent HyDefinition cut quality
- Faster cut speeds let you produce more parts per hour; higher quality cutting virtually eliminates the cost of secondary operations
- Patented PowerPierce® technology lets you pierce thicker than ever before and replace slower-cutting oxyfuel technology
“Do anything” versatility
- Cuts, bevels, and marks carbon steel, stainless steel, aluminium, and other metals with HyDefinition precision
- Modular system design allows easy power supply upgrades to increase system capabilities when requirements change
Industry-leading reliability
- Robust, simple system architecture with 50% fewer parts than most competitive systems
- Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standard
Specifications
| Mild steel cut capacity | Dross free Production pierce Maximum cutting capacity |
32 mm (1-1/4") 38 mm (1-1/2") 64 mm (2-1/2") |
|---|---|---|
| Stainless steel cut capacity | Production pierce Maximum cutting capacity |
32 mm (1-1/4") 50 mm (2") |
| Aluminium cut capacity | Production pierce Maximum cutting capacity |
25 mm (1") 50 mm (2") |
| Speed (Mild steel) |
Book specification at highest output current | 12 mm (1/2") 3850 mm/m (145 ipm) |
| Cut angle | ISO 9013 range* | 2-4 |
| Weldability | Ready to weld | |
| Process gases by material (Plasma/shield) |
Mild steel Stainless steel Aluminum |
02/Air, 02/02, Ar/Air |
| Process amps (Cutting) |
Not all processes available for all materials | 30-260 |