Laser Consumables

Nozzles | Optics | Ceramics | Accessories

Centricut laser consumables, stocked in New Zealand

Plazmax stock and supply Centricut laser consumables for CO2 and fibre cutting machines. Nozzles, ceramics, optics and the accessories that go with them, held in New Zealand and dispatched the same business day on most items.

Plazmax is an authorised Centricut reseller. Centricut is the laser consumable range from Hypertherm Associates, built around Esse A part numbers. Esse A engineer and manufacture laser consumables from Sasso Marconi in Italy, and build under contract for original equipment manufacturers around the world. If you have been buying laser consumables for a while you may know the Esse codes better than the Centricut ones. Both are printed in the catalogue and both are on our listings, so either will find the part.

Centricut

What the Centricut laser range covers

The Centricut catalogue runs to more than 3,000 part numbers across CO2 and fibre machines.

Nozzles in copper, chrome plated and hard chrome, single and double, conical and cylindrical, high pressure and low pressure, shower and inner and outer types.

Optics including fibre laser lenses, protective windows and mounted focus modules.

Ceramics and the holders, adapters and nuts that sit behind the nozzle.

Accessories for looking after the optics: lens cleaning tissue, swabs, polish, cleaning fluid, mirror maintenance bases and laser safety glasses.

The machines and cutting heads it covers

Amada, BLM-Adige, Bystronic, Cincinnati, Durma, Ermaksan, Finn Power, GHT, Hans, HK Laser and Systems, Koike, LVD, Mazak, Mitsubishi, NTC-Beyeler, Penta, Precitec, Prima Industrie, Raytools, Salvagnini, SHT, Tanaka and Trumpf.

The fastest route to the right part is always the code on the one that came off the machine. Centricut publish the Esse A number and the Centricut number side by side, and our listings carry both, so either will land you on it. Send it through and we will confirm the fitment.

Additional parts and consumables

Optics, lens cleaning consumables, mirror maintenance parts and safety glasses for CO2 and fibre laser systems.

Optics - fibre laser lenses, protective windows and mounted focus modules.

Cleaning - lens tissue, cotton swabs, lens polish, cleaning fluid and pre-cut cotton.

Maintenance - mirror maintenance bases, lens injectors and magnifiers.

Safety - CE approved CO2 laser safety glasses.

Protective windows and lenses are consumables in their own right, and they are the ones most often run past their useful life. A window that is fogged or spattered costs you cut quality well before it fails outright.

Handle optics by the edges, use proper lens tissue and cleaning fluid rather than whatever is on the bench, and keep a spare window on hand. We supply the cleaning consumables alongside the optics, so they can come on the same order.

Ordering

Your machine's cutting condition chart for the material and thickness is the authority on what to run. The nozzle that came off is a useful clue, not proof it was the right one.

Order through the Plazmax webstore, or send us the part code and we will sort it. We supply laser consumables across New Zealand and Australia, held in New Zealand, with most items dispatched the same business day.

Working out which nozzle you need

Single or double

A single nozzle has one orifice. A double has an inner insert pressed into an outer, which improves edge quality and gas flow. Our part names start with S or D so you can tell them apart at a glance.

Bore size

The number in the name is the orifice diameter in millimetres, so S1.0 is a 1.0 mm single and D4.0 is a 4.0 mm double. It is usually marked on the nozzle itself.

Internal geometry

Conical nozzles are for high pressure cutting on non-ferrous material with nitrogen, air or argon. Cylindrical nozzles are for low pressure mild steel cutting with oxygen. They are not interchangeable at the same bore size.

Material and plating

Copper, chrome plated and hard chrome behave differently on durability, cleaning and spatter resistance. Which one suits your machine and process is worth a phone call rather than a guess.

FAQs

Centricut covers Amada, BLM-Adige, Bystronic, Cincinnati, Durma, Ermaksan, Finn Power, GHT, Hans, HK Laser and Systems, Koike, LVD, Mazak, Mitsubishi, NTC-Beyeler, Penta, Precitec, Prima Industrie, Raytools, Salvagnini, SHT, Tanaka and Trumpf, and we supply from that range.
They are two codes for the same part. Centricut publish both side by side in their catalogue, and our listings carry both, so either one will find it.
No. The range is built around Esse A part numbers, and as well as engineering its own laser nozzles, nozzle holders and accessories, Esse A manufactures laser consumables under contract for original equipment manufacturers around the world. Centricut itself is the laser consumable range from Hypertherm Associates and is not affiliated with Amada, Bystronic, Trumpf or any other laser machine manufacturer.
Esse A engineer and manufacture laser consumables from Sasso Marconi in Italy.
Yes. Lenses, protective windows and focus modules are in the range, along with the cleaning consumables that go with them.
Match the code off the old part, or work from your machine's cutting condition chart for the material and thickness you are cutting. If you are not certain, send us the code or ring us and we will confirm it.
Yes. We supply laser consumables to both New Zealand and Australia. Stock is held in New Zealand.

Request for information

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name*
This site is protected by reCAPTCHA.
By submitting this form I agree to the Privacy Policy, and that Plazmax may use this information to respond to my enquiry and for marketing and communication purposes.